Sep 24, 2018 · No safety signs, outdated safety signs, and broken safety signs. Machinery left unattended while in use. Obstructions – of fire exits, cut out switches, etc. Cluttered workstations. Trailing wires and cables. Chemical substances in unmarked containers. Chemical splashes. Incorrect tools used for tasks. Confined spaces. Electric shocks, burns ... Find out what the common slip, trip, and fall hazards are in your workplace. Information and tools from Healthy Working Lives on slip, trip and fall hazards in the workplace In line with health and safety people must be able to move around the workplace safely. Trailing cables and hoses also pose a significant trip hazard.Againthesemustbeidentifiedandcontrolsput inplacetoreducetherisk.Theseinclude: Identify poorly sited gas, liquid supply points and reroutewherepossible Siteelectricaloutletstoavoidtrailingcables Place equipment close to electrical outlets where possible Avoidtheuseofextensioncablesifpossible Trailing cables . If you can use cordless tools you may not need to use cables. Where you need cables for temporary lighting or mains-powered tools, run them at high level, especially along corridors . Wet or slippery surfaces . Treat slippery surfaces with stone (mud) or grit (for ice) or provide temporary covering. Mining Cable for Industrial, Commercial and Specialty Applications This new catalog contains in-depth information on the most comprehensive line of mining cable available today. It features the latest information on products, along with detailed technical and specification data in indexed sections – with an easy-to-use “spec-on-a-page ... Apr 02, 2018 · Common work practices may lead to work injuries and it is always best to deal with any hazards promptly. According to the HSE, slips and falls account for 24% of workplace accidents. This is mainly caused by preventable dangers such as slippery floor surfaces, trailing cables and poor lighting. However, many portable electrical items like lamps and radios are supplied with relatively short cables. So sometimes it is unavoidable not to have to use one, but beware of the following dangers. Damaged cable, due to leads being walked over, continually bent at the same point or stored badly. You can trip or fall over taut, over-stretched cable.